Excalibur 1000

Wall Mounting
The Excalibur 1000 is mounted on two telescopic legs that can adjust to suit the height of the user. Fixed to the wall at its top end only, the weight of the machine, material and cutting forces is stabilized by the legs. Unlike other wall-mounted cutters, there is little reliance upon the stability of the wall or fixtures.

Free Standing
A free standing leg kit isavailable as an option should the Excalibur be required for use in the middle of the workshop floor. Large backing panels on both sides of the machine give maximum support to the material being cut.

Cutting Line
All four tools cut along the same cutting line.

Cutting Line Indicator
The Excalibur has a clear plastic strip along the edge of the clamp which accurately indicates the position of the cut line. This is particularly useful when cutting boards to crop lines, pencil marks or the edges of an image.

Ratchet Feature
The lower multi-cutting head has a built in ratchet which enables thick dense boards, such as PVC foamboard, to be cut with ease. Notch the cutter into the depth required and take the cut, repeat notching the ratchet in and cutting until the full depth is reached.

Balance Weight
The Excalibur 5000 has a counter balance weight that can be connected to either cutter head with the flip of a switch. The counter balance takes the effort out of lifting the cutting when repetitive cutting. It also enables the Twin Wheel Cutter to be easily parked at the top of the machine. When released, the balanced cutting head stays exactly in the last position ready for the next operation.

Pressure Sensitive Clamp
The clamp system consists of a unique friction brake design which holds the board under the pressure applied by the user. The harder the clamping handle is pushed, the firmer the grip on the board. This has two primary benefits: light clamping on soft boards prevents surface damage; when cutting to a line, pressure sensitivity gives the user the ability to lightly clamp the board to hold in position, but allows it to be moved for final alignment.

One Piece Squaring Arm
The horizontal squaring arm is machined from a single heavy duty aluminum extrusion. This extrusion includes the channel in which the material is supported and is individually checked for straightness. Both the left and right hand sides are therefore in perfect alignment with each other, an alignment that is essential in order to obtain accurate square cuts.

Squaring Adjuster
The setting of the Vertical Cutting Bar to the Horizontal Squaring Arm requires a setting of exactly 90 degrees. The single hand wheel at the top of the machine provides easy and accurate squaring adjustment.

Flip Stops
Cutting to size is very easy. Two flip stops can be engaged or disengaged without disturbing the settings. Accurate measuring and cutting by eye is made simple by the clear dual calibrated scales.